AudioCodes Mediant 800 MSBG - Ip-Media Ip-Media-Settings

CLI Reference Guide 90 Document #: LTRT-17940
System and VoIP Functionalities
5.10 ip-media ip-media-settings
This command defines IP Media / IP-Media-Settings mode.
Syntax:
ip-media ip-media-settings <index>
set <parameter> <value>
The command’s syntax format is described below:
Arguments Description
<index> Defines the table row index.
<parameter> <value> Sets the following table parameters:
 NetAnn-Annc-ID
 Transcoding-ID
 beep-on-conf
 conf-dtmf-clamping
 conf-dtmf-reporting
 conf-id
 defaults
 mscml-id
For a description of these parameters, refer to the User's Manual.
Defaults
NA
Command Modes
Enable
Examples:
The following example defines defines IP Media / IP-Media-Settings mode.
(config-voip)# ip-media ip-media-settings
(sip-ip-media-setting)# set beep-on-conf on
(sip-ip-media-setting)# set ….