CLI Reference Guide 6. Show Commands
Version 6.4 157 January 2012
6.2.2 FXS/FXO
This command displays the current status, main PM parameters and main configuration
parameters to a specific analog interface (FXSor FXO).
Syntax:
The syntax of this command includes the following variations:
show voip interface fxs-fxo <slot/port>
The command syntax format is described below:
Arguments Description
slot Defines the module slot index as shown on the front panel.
port Defines the port index within the selected module.
Related Commands:
interface fxs-fxo <slot/port>
Examples:
The following example displays the current status, main PM parameters and main
configuration parameters.
show voip interface fxs-fxo
To Next Page
Loading...
