EasyManua.ls Logo

AudioCodes Mediant 800 MSBG - Sourcenumbermaptel2 Ip

AudioCodes Mediant 800 MSBG
160 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CLI Reference Guide 128 Document #: LTRT-17940
System and VoIP Functionalities
5.16.8.6 SourceNumberMapTel2Ip
This command defines the SourceNumberMapTel2Ip settings.
Syntax:
# gw manipulations SourceNumberMapTel2Ip <index>
# set <parameter> <value>
The command’s syntax format is described below:
Arguments Description
<index> Defines the table row index.
<parameter> <value> Sets the following table parameters:
DestinationPrefix
IsPresentationRestricted
LeaveFromRight
Prefix2Add
RemoveFromLeft
RemoveFromRight
SourcePrefix
SrcIPGroupID
SrcTrunkGroupID
Suffix2Add
defaults
For a description of these parameters, refer to the User's Manual.
Defaults
NA
Command Modes
Enable
Examples:
The following example enables the Stripped Digits From Left to be ‘5.
(config-voip)# gw manipulations SourceNumberMapTel2Ip 18
(SourceNumberMapTel2Ip-18)# set removefromleft 5

Table of Contents

Other manuals for AudioCodes Mediant 800 MSBG

Related product manuals