AudioCodes Mediant 800 MSBG - Sbc-Alternative-Routing-Reasons

CLI Reference Guide 5. VoIP Commands
Version 6.4 109 January 2012
5.15.4 sbc-alternative-routing-reasons
This command defines the sbc-alternative-routing-reasons table.
Syntax:
sbc routing sbc-alternative-routing-reasons <index>
set <parameter> <value>
The command’s syntax format is described below:
Arguments Description
<index> Defines the table row index.
<parameter> <value> Sets the following table parameters:
 ReleaseCause
 defaults
For a description of these parameters, refer to the User's Manual.
Defaults
NA
Command Modes
Enable
Examples:
The following example sets the Release Cause to ‘1’.
(config-voip)# sbc routing sbc-alternative-routing-reasons 1
(sbc-alternative-routing-reasons-1)# set ReleaseCause 1