AudioCodes Mediant 800 MSBG - Application_Type

CLI Reference Guide 68 Document #: LTRT-17940
System and VoIP Functionalities
5.2.3 application_type
This command defines the application type on the specified Layer 3 interface.
Syntax:
application_type <type>
The command’s syntax format is described below:
Arguments Description
<type>
Specifies the application type - Control, Media or OAMP
Defaults
NA
Command Modes
Enable
Examples:
The following example configures the control application type for interface VLAN 3.
(config-voip)# interface vlan 3
(conf-if-vlan 3)# application_type control