AudioCodes Mediant 800 MSBG - Network Interface Configuration; Interface Network-If

CLI Reference Guide 5. VoIP Commands
Version 6.4 65 January 2012
5.2 Network Interface Configuration
5.2.1 interface network-if
This command displays and configures the network interface table.
Syntax:
The syntax of this command includes the following variations:
interface network-if <index>
set <parameter> <value>
The command syntax format is described below:
Arguments Description Options
Sets the following table parameters:
<parameter> <value> Application-type control
maintenance
media
media-control
oamp
oamp-control
oamp-media
oamp-media-control
defaults
gateway
Ip-address
mode ipv4-manual
ipv6-manual
ipv6-manual-prefix
name
prefix-length
primary-dns
secondary-dns
underlying-if
vlan-id
For a description of these parameters, refer to the User's Manual.
Command Modes
Enable