CLI Reference Guide 18 Document #: LTRT-17940
System and VoIP Functionalities
2.2.5 Understanding CLI Error Messages
The following table lists and defines some of the more common error messages given in the
CLI.
Table 2-3: CLI Error Messages
Message Helpful Hints
Invalid command The command may not be valid in the current command mode, or you may
not have entered enough correct characters for the command to be
recognized. Try using ‘?’ to determine your error.
Incomplete
command
You may not have entered all of the pertinent information required to make
the command valid. Try using ‘?’ to determine your error.
Notes:
• Optional arguments in commands are marked in square brackets [ ].
• To ensure that all failed CLI commands’ error/information messages are
displayed in the CLI console, you can redirect these messages, received
from the Syslog console, to the CLI console by running the debug log
command. This command can be disabled by running the no debug log
command.
To Next Page
Loading...
