AudioCodes Mediant 800 MSBG - General Settings

CLI Reference Guide 98 Document #: LTRT-17940
System and VoIP Functionalities
5.13.4 general settings
This command defines the SIP Definitions general settings.
Syntax:
sip-definition general-settings
set <parameter> <value>
The command’s syntax format is described below:
Arguments Description
<parameter> <value> Sets the following table parameters:
 183-msg-behavior
 3xx-behavior
 ShouldRegister
 anonymous-mode
 app-sip-transport-type
 asserted-identity-m
 ch-select-mode
 comfort-tone
 contact-restriction
 defaults
 det-fax-on-ans-tone
 disp-name-as-src-nb
 early-media
 enable-gruu
 enable-sips
 fax-sig-method
 forking-handling
 hist-info-hdr
 min-session-expires
 mult-ptime-format
 nat-ip-addr
 np-n-type-to-rpi-hdr
 p-associated-uri-hdr
 p-charging-vector
 phone-in-from-hdr
 play-bsy-tone-2tel
 play-rbt-2ip
 play-rbt2tel
 prack-mode
 reason-header
 remote-party-id
 rtp-only-mode
 sdp-session-owner
 semi-att-transfer
 session-exp-method
 session-expires-time
 sip-dst-port