AudioCodes Mediant 800 MSBG - Sip-Interface

CLI Reference Guide 88 Document #: LTRT-17940
System and VoIP Functionalities
5.9.7 sip-interface
This command defines the SIP Interface table.
Syntax:
control-network sip-interface <index>
set <parameter> <value>
The command’s syntax format is described below:
Arguments Description
<index> Defines the table row index.
<parameter> <value> Sets the following table parameters:
 ApplicationType
 MessagePolicy
 NetworkInterface
 SRD
 TCPPort
 TLSPort
 UDPPort
 defaults
For a description of these parameters, refer to the User's Manual.
Defaults
NA
Note
Network Interface shuold be taken from: interface network-if (name)
Command Modes
Enable
Examples:
The following example defines the SIP interface table.
(config-voip)# control-network sip-interface 1
(sip-interface-1)# set srd 1
(sip-interface-1)# set ….
(sip-interface-1)# set ….