AudioCodes Mediant 800 MSBG - Dtmf-And-Suppl Supplementary-Services

CLI Reference Guide 5. VoIP Commands
Version 6.4 119 January 2012
5.16.5 dtmf-and-suppl supplementary-services
This command defines the dtmf and supplementary parameters.
Syntax:
gw dtmf-and-suppl supplementary-services
set <parameter> <value>
The command’s syntax format is described below:
Arguments Description
<parameter> <value> Sets the following table parameters:
 3w-conf-mode
 3w-conf-nonalloc-prts
 as-subs-ipgroupid
 blind-transfer
 call-forward
 call-hold-remnd-rng
 call-prio-mode
 call-waiting
 caller-ID-type
 cfe-ring-tone-id
 conf-id
 defaults
 dis-reminder-ring
 enable-3w-conf
 enable-caller-id
 enable-mwi
 enable-transfer
 flash-key-seq-style
 flash-key-seq-tmout
 eld-timeout
 hold
 hold-format
 hold-to-isdn
 hook-flash-code
 mlpp-diffserv
 music-on-hold
 mwi-analog-lamp
 mwi-display
 mwi-srvr-ip-addr
 mwi-srvr-transp-type
 mwi-subs-expr-time
 mwi-subs-ipgrpid
 mwi-subs-rtry-time
 mx-3w-conf-onboard
 nb-of-cw-ind
 nrt-sub-retry-time
 nrt-subscription