CLI Reference Guide 4. System Commands
Version 6.4 53 January 2012
4.10 snmp trap destination
This command configures SNMP trap destinations.
Syntax:
The syntax of this command includes the following variations:
snmp trap destination <index>
set <parameter> <value>
Arguments Description
<index> Defines the table row index.
<parameter> <value> Sets the following table parameters:
set ip-address
set port
set send-trap
For a description of these parameters, refer to the User's Manual.
Command Modes
Enable
Examples:
This example defines the community string used in traps.
(config-system)# snmp traps destination 1
(trap-destination 1)# set ip address
To Next Page
Loading...
