CLI Reference Guide 158 Document #: LTRT-17940
System and VoIP Functionalities
6.2.3 enm
This command displays detailed information regarding the E and M port.
Syntax:
The syntax of this command includes the following variations:
show voip interface enm
Examples:
The following example displays detailed information regarding the E and M port.
show voip interface enm
Module in slot 2, Ports type is E_M
Port 1 Hook indication status:
Detected off Hook State
Generated off Hook State
Port 2 Hook indication status:
Detected off Hook State
Generated on Hook State
Module Configuration:
Signaling Type 0
System Type - signaling
Voice Type - two wires
Line Impedance USA 600 Ohm
Country Coefficients - USA
Hook Debounce Timer - 75
Off Hook Glare Disable
To Next Page
Loading...
