AudioCodes Mediant 800 MSBG - Media Fax-Modem Bypass

CLI Reference Guide 5. VoIP Commands
Version 6.4 139 January 2012
5.18.3 media fax-modem bypass
This command configures the bypass configuration.
Syntax:
# media fax-modem bypass
# set <parameter> <value>
The command’s syntax format is described below:
Arguments Description
<parameter> <value> Sets the following table parameters:
 NSE-mode
 basic-packet-interval
 coder
 defaults
 fax-bypass-output-gain
 jitter-buffer-minimum-delay
 modem-bypass-output-gain
 packing-factor
For a description of these parameters, refer to the User's Manual.
Defaults
NA
Command Modes
Enable
Examples:
The following example sets the Fax/Modem bypass coder.
(config-voip)# media fax-modem bypass
(media-fax-modem-bypass)# set coder G711-alaw