AudioCodes Mediant 800 MSBG - Ip-Group

CLI Reference Guide 5. VoIP Commands
Version 6.4 85 January 2012
5.9.4 ip-group
This command defines the ip-group table.
Syntax:
control-network ip-group <index>
set <parameter> <value>
The command’s syntax format is described below:
Arguments Description
<index> Defines the table row index.
<parameter> <value> Sets the following table parameters:
 AlwaysUseRouteTable
 AuthenticationMode
 ClassifyByProxySet
 ContactName
 ContactUser
 Description
 EnableSurvivability
 InboundManSet
 MaxNumOfRegUsers
 MediaRealm
 MethodList
 OutboundManSet
 ProfileId
 ProxySetId
 RegistrationMode
 RoutingMode
 SIPGroupName
 SRD
 ServingIPGroup
 SipReRoutingMode
 Type
 defaults
For a description of these parameters, refer to the User's Manual.
Defaults
NA
Command Modes
Enable
Examples:
The following example defines the ip-group table.
(config-voip)# control-network ip-group 1
(ip-group-1)# set contactname john_brown