AudioCodes Mediant 800 MSBG - Sas; Stand-Alone-Survivability

CLI Reference Guide 92 Document #: LTRT-17940
System and VoIP Functionalities
5.12 SAS
The following command define SAS.
5.12.1 stand-alone-survivability
This command enables the Stand Alone Survivability feature.
Syntax:
sas stand-alone-survivability
set <parameter> <value>
The command’s syntax format is described below:
Arguments Description
<index> Defines the table row index.
<parameter> <value> Sets the following table parameters:
 set defaults
 enable-enum
 rdcy-sas-proxy-set
 record-route
 sas-block-unreg-usrs
 sas-connection-reuse
 sas-contact-replace
 sas-default-gw-ip
 sas-emerg-nb
 sas-emerg-prefix
 sas-inb-manipul-md
 sas-local-sip-tcp-port
 sas-local-sip-tls-port
 sas-local-sip-udp-port
 sas-proxy-set
 sas-registration-time
 sas-subscribe-resp
 sas-survivability
 sasbindingmode
For a description of these parameters, refer to the User's
Manual.
Defaults
NA
Command Modes
Enable