AudioCodes Mediant 800 MSBG - Dns Srv2 Ip

CLI Reference Guide 84 Document #: LTRT-17940
System and VoIP Functionalities
5.9.3 dns Srv2Ip
This command defines the control-network Srv2Ip table.
Syntax:
control-network dns Srv2Ip <index>
set <parameter> <value>
The command’s syntax format is described below:
Arguments Description
<index> Defines the table row index.
<parameter> <value> Sets the following table parameters:
 Dns1
 Dns2
 Dns3
 InternalDomain
 Port1
 Port2
 Port3
 Priority1
 Priority2
 Priority3
 TransportType
 Weight1
 Weight2
 Weight3
 defaults
For a description of these parameters, refer to the User's Manual.
Defaults
NA
Command Modes
Enable
Examples:
The following example defines the First IP address.
(config-voip)# control-network dns Srv2Ip 5
(Srv2Ip-5)# set Port1 10
(Srv2Ip-5)# set ….