CLI Reference Guide 3. General Commands
Version 6.4 21 January 2012
3.3 copy (auxiliary file)
This command copies an auxiliary file from a URL source to the device.
Syntax:
The syntax of this command can include the following variations:
copy <aux-file> from <URL>
The command’s syntax format is described below:
Arguments Description
<aux-file> The auxiliary file type can be one of the following:
call_progress_tones - Call progress call file
cas_table – CAS table file
coder_table – Coder table file
dial_plan – Dial plan file
tls_cert – TLS certificate file
tls_private_key – TLS private key file
tls_root_cert – TLS trusted root certificate file
voice_prompts – Voice prompt file
user_info – User info file
web_logo – Web logo file
voice_xml – Voice xml file
prerecorded_tones - Prerecorded tones file
from
Copy the auxiliary file from URL.
<URL> File source URL. Can be one of the following: http,https, tftp
or nfs
Defaults:
NA
Notes:
1. CAS table auxiliary file copy is supported only on MSBG products.
2. A copied file must be burned (via the ‘write’ command) in order to stay persistent.
3. Please refer to the user manual in order to learn about AudioCodes Auxiliary Files
format and roles.
Command Modes:
Enable
Related Commands:
erase, dir, write
To Next Page
Loading...
