CLI Reference Guide 3. General Commands
Version 6.4 23 January 2012
3.4 copy (configuration file)
This command copies a configuration file from a URL source to the device and from the
device to a destination URL or CLI console.
Syntax:
The syntax of this command can include the following variations:
copy <configuration-file> from <URL>
copy <configuration-file> to <URL>
copy <configuration-file> to console
The command syntax format is described below:
Arguments Description
< configuration-file > The configuration file type can be one of the following:
data_configuration – data (router’s) configuration file
voice_configuration – voice configuration file (i.e. ini file)
<URL>
When copying from a URL, the file source URL can be one
of the following: http, https, tftp, nfs.
When copying to a URL, the file destination URL can be one
of the following: http, https.
from Copy the configuration file from URL file source.
to Copy the current running configuration (file) to a destination.
console Copy the configuration file to the CLI console.
Defaults:
NA
Notes:
1. When copying the configuration file to a URL destination, the device uses the PUT
HTTP command in order to transfer the file.
2. Please refer to the User Manual in order to learn about AudioCodes data and voice
configuration files format and roles
Command Modes:
Enable
Related Commands:
copy firmware
Examples:
The following example copies the date configuration file to the CLI console.
# copy data_configuration to console
To Next Page
Loading...
