AudioCodes Mediant 800 MSBG - Snmp Trap

CLI Reference Guide 52 Document #: LTRT-17940
System and VoIP Functionalities
4.9 snmp trap
This command configures SNMP trap managers.
Syntax:
snmp trap
set <parameter> <value>
Arguments Description
<parameter> <value> Sets the following parameters:
 auto-send-keep-alive
 community-string
 defaults
 manager-host-name
For a description of these parameters, refer to the User's Manual.
Defaults
NA
Command Modes
Enable
Examples:
This example defines the community string used in traps.
(config-system)# snmp trap
(snmp-trap)# set community-string comm_string_A