AudioCodes Mediant 800 MSBG - Proxy-Set

CLI Reference Guide 5. VoIP Commands
Version 6.4 87 January 2012
5.9.6 proxy-set
This command defines the proxy-set table.
Syntax:
control-network proxy-set <index>
set <parameter> <value>
The command’s syntax format is described below:
Arguments Description
<index> Defines the table row index.
<parameter> <value> Sets the following table parameters:
 ClassificationInput
 EnableProxyKeepAlive
 IsProxyHotSwap
 ProxyKeepAliveTime
 ProxyLoadBalancingMethod
 ProxyRedundancyMode
 SRD
 defaults
For a description of these parameters, refer to the User's Manual.
Defaults
NA
Command Modes
Enable
Examples:
The following example defines the proxy-set table.
(config-voip)# control-network proxy-set 1
(proxy-set-1)# set ClassificationInput IPnPortnTransport
(proxy-set-1)# set …. .
(proxy-set-1)# set …. .