AudioCodes Mediant 800 MSBG - Redirect-Number-Map-Tel2 Ip

CLI Reference Guide 134 Document #: LTRT-17940
System and VoIP Functionalities
5.16.8.12 redirect-number-map-tel2ip
This command defines the redirect-number-map-tel2ip table.
Syntax:
gw manipulations redirect-number-map-tel2ip <index>
set <parameter> <value>
The command’s syntax format is described below:
Arguments Description
<index> Defines the table row index.
<parameter> <value> Sets the following table parameters:
 DestinationPrefix
 IsPresentationRestricted
 LeaveFromRight
 Prefix2Add
 RedirectPrefix
 RemoveFromLeft
 RemoveFromRight
 SrcIPGroupID
 SrcTrunkGroupID
 Suffix2Add
 defaults
For a description of these parameters, refer to the User's Manual.
Defaults
NA
Command Modes
Enable
Examples:
The following example sets the destination prefix.
(config-voip)# gw manipulations redirect-number-map-tel2ip 8
(redirect-number-map-tel2ip-8)# set DestinationPrefix abcd