CLI Reference Guide 38 Document #: LTRT-17940
System and VoIP Functionalities
3.15 username administrator
This command configures the device’s administrator credentials.
Syntax:
The syntax of this command can include the following variations:
username administrator name <name>
username administrator password <password>
The command’s syntax format is described below:
Arguments Description
name Sets the administrator’s name.
<name> Sets the new value for the administrator’s name.
password Sets the administrator’s password.
<password> Sets the new value for the administrator’s password.
Defaults:
NA
Notes:
The administrator’s credentials are device wide. i.e., setting the administrator’s credentials
will take effect in the Web as well as the CLI authentication and vice-versa.
Command Modes:
Enable
Related Commands:
NA
Examples:
The following example sets the administrator’s name to ‘James’.
# username administrator name James
To Next Page
Loading...
