AudioCodes Mediant 800 MSBG - Manipulations Ip-Outbound-Manipulation

CLI Reference Guide 5. VoIP Commands
Version 6.4 105 January 2012
5.14.4 manipulations ip-outbound-manipulation
This command defines the outbound manipulations table.
Syntax:
sbc manipulations ip-outbound-manipulation <index>
set <parameter> <value>
The command’s syntax format is described below:
Arguments Description
<index> Defines the table row index.
<parameter> <value> Sets the following table parameters:
 DestHost
 DestIPGroupID
 DestUsernamePrefix
 IsAdditionalManipulation
 LeaveFromRight
 Prefix2Add
 PrivacyRestrictionMode
 RemoveFromLeft
 RemoveFromRight
 SrcHost
 SrcIPGroupID
 SrcUsernamePrefix
 Suffix2Add
 defaults
 manipulated-uri
 request-type
For a description of these parameters, refer to the User's Manual.
Defaults
NA
Command Modes
Enable
Examples:
The following example sets the Request Type to ‘all’.
(config-voip)# sbc manipulations ip-outbound-manipulation 1
(ip-outbound-manipulation-1)# set request-type all