AudioCodes Mediant 800 MSBG - Configuring Fax;Modem; Media Fax-Modem T38

CLI Reference Guide 5. VoIP Commands
Version 6.4 137 January 2012
5.18 Configuring Fax/Modem
The following defines how to configure Fax/Modem.
5.18.1 media fax-modem t38
This command configures media fax-modem t38 parameters.
Syntax:
# media fax-modem t38
# set <parameter> <value>
The command’s syntax format is described below:
Arguments Description
<parameter> <value> Sets the following table parameters:
 ECM-mode
 defaults
 enhanced-redundancy-depth
 max-rate
 redundancy-depth
 version
 volume
For a description of these parameters, refer to the User's Manual.
Defaults
NA
Command Modes
Enable
Examples:
The following example enables ECM (Error Correction Mode) during T.38 Fax Relay.
(config-voip)# (config-voip)# media fax-modem t38
(media-fax-modem-T38)# set ECM-mode on