AudioCodes Mediant 800 MSBG - Configuring Qoe Settings; Media Qoe

CLI Reference Guide 146 Document #: LTRT-17940
System and VoIP Functionalities
5.25 Configuring QoE Settings
The following defines how to configure Quality of Experience (QoE) settings.
5.25.1 media QoE
This command sets (QoE) media parameters.
Syntax:
media QoE
set <parameter> <value>
The command’s syntax format is described below:
Arguments Description
<parameter> <value> Sets the following table parameters:
 defaults
 voice-quality-monitoring-enable
For a description of these parameters, refer to the User's Manual.
Defaults
NA
Command Modes
Enable
Examples:
The following example defines the voice-quality-monitoring-enable parameter.
(config-voip)# media QoE
(media-QoE)# set voice-quality-monitoring-enable full