AudioCodes Mediant 800 MSBG - Configuring General Media Settings; Media General

CLI Reference Guide 142 Document #: LTRT-17940
System and VoIP Functionalities
5.21 Configuring General Media Settings:
The following defines how to configure general Media settings.
5.21.1 media general
This command sets general media capabilities.
Syntax:
media general
set <parameter> <value>
The command’s syntax format is described below:
Arguments Description
<parameter> <value> Sets the following table parameters:
 DSP-version-template-number
 defaults
 media-channels
For a description of these parameters, refer to the User's Manual.
Defaults
NA
Command Modes
Enable
Examples:
The following example enables the DSP IP Media Detectors.
(config-voip)# media general
(media-IPM-detectors)# set IPM-detectors-enable enable