CLI Reference Guide 3. General Commands
Version 6.4 33 January 2012
3.10 enable
This command switches the device to Enable Mode from Basic mode.
Syntax:
The syntax of this command includes the following:
enable
Defaults:
The default password for switching to Enable Mode is ‘Admin’.
Notes:
1. When switching to Enable Mode, the user will be prompted to enter the Enable Mode
password.
2. This password can be changed via the enable password command.
Command Modes:
Basic
Related Commands:
disable, enable password
Examples:
The following example command switches the device to Enable mode.
> enable
To Next Page
Loading...
