CLI Reference Guide 50 Document #: LTRT-17940
System and VoIP Functionalities
4.7 web
This command enables and defines the Web server.
Syntax:
The syntax of this command includes the following variations:
web
set <parameter> <value>
Arguments Description
<parameter> <value> Sets the following parameters:
set control-pass-via-snmp
set http-auth-mode
set http-port
set https-cipher-string
set https-port
set req-client-cert
set secured-connection
set wan-http-allow
set wan-https-allow
set web-acl
For a description of these parameters, refer to the User's Manual.
Defaults
NA
Command Modes
Enable
Examples:
This example enables the use of client certificates for HTTPS connection.
(config-system)# web
(web)# set req-client-cert on
To Next Page
Loading...
