AudioCodes Mediant 800 MSBG - Configuring Media Realm Settings; Media Realm

CLI Reference Guide 5. VoIP Commands
Version 6.4 143 January 2012
5.22 Configuring Media Realm Settings
The following defines how to configure Media Realm settings.
5.22.1 media realm
This command sets the Media Realm parameters.
Syntax:
media realm <index>
set <parameter> <value>
The command’s syntax format is described below:
Arguments Description
<index> Defines the table row index.
<parameter> <value> Sets the following table parameters:
 defaults
 ipv4if
 ipv6if
 is-default
 media-realm-transrate-ratio
 name
 port-range-end
 port-range-start
 session-leg
For a description of these parameters, refer to the User's Manual.
Defaults
NA
Command Modes
Enable
Examples:
The following example sets the number of media sessions associated with the range of
ports.
(config-voip)# media realm 1
(realm-1)# set session-leg 10