Azbil MagneW FLEX+/PLUS+ MGG10C - Page 4

Safety Azbil Corporation
ii Model MGG10C/14C - MagneW FLEX+/PLUS+ Converter
CAUTION
Install the owmeter in a location with an ambient temperature of -25 °C to
60 °C (-13 °F to 140 °F) and an ambient humidity of 5 to 100% RH to prevent
equipment malfunction or output errors.
CAUTION
Do not install the owmeter near high-current power lines, motors or transformers
to prevent damage from electromagnetic induction, which can cause equipment
malfunction or output errors.
CAUTION
Do not install the owmeter in a location subject to direct sunlight, wind, rain,
severe vibration, or in a highly corrosive atmosphere. The converter and detector
can be damaged.
CAUTION
Be sure to ground the welding power transformer when welding near the
owmeter to avoid output errors.
CAUTION
DO NOT use the owmeter to ground a welder. It can damage the owmeter.