Using the display panel Azbil Corporation
4-28 Model MGG10C/14C - MagneW FLEX+/PLUS+ Converter
Range function
Built-in counter
function
Contact input function Contact output function
4: Normal/reverse
external switching
range
A: Addition 3: External range
switching
X: Not activated
1: Alarm output
2: Range switching output
4: Self-check result output
5: Empty detection function
6: High/low limit alarm
B: Addition with
preset
3: External range
switching
3: Preset output
C: Normal/reverse
totalization
3: External range
switching
X: Not activated
1: Alarm output
2: Range switching output
4: Self-check result output
5: Empty detection function
6: High/low limit alarm
2- contact inputs
Range function
Built-in counter
function
Contact input function
Contact output
function
0: Single range A: Addition X: Not activated X: Not activated
1: External 0% lock X: Not activated
2: External auto zeroing X: Not activated
4: Counter reset X: Not activated
5: External 0% lock + Auto zeroing X: Not activated
7: External 0% lock + Counter reset X: Not activated
9: External auto zeroing + Counter
reset
X: Not activated
2: External
switching dual range
A: Addition 3 External range switching X: Not activated
6: External 0% lock + Range
switching
X: Not activated
8: External auto zeroing + Range
switching
X: Not activated
A: External range switching +
Counter reset
X: Not activated
4: Normal/reverse
external switching
range
A: Addition 3 External range switching X: Not activated
6: External 0% lock + Range
switching
X: Not activated
8: External auto zeroing + Range
switching
X: Not activated
A: External range switching +
Counter reset
X: Not activated
C: Normal/reverse
totalization
3 External range switching X: Not activated
6: External 0% lock + Range
switching
X: Not activated
8: External auto zeroing + Range
switching
X: Not activated
A: External range switching +
Counter reset
X: Not activated