Field Description
• 3 "+ / @1$ 5+1?
• <? "+ / <11 5+1?
• <? "+ / <11 5+1?
• <? "+ / @1$ 5+1?
• <? "+ / <11 5+1?
• <? "+ / @1$ 5+1?
• ): The interface is created but remains inactive.
Current Speed / Mode Shows the actual mode and actual speed of the interface.
Possible values:
• "+ / <11 5+1?
• "+ / <11 5+1?
• "+ / @1$ 5+1?
• "+ / <11 5+1?
• "+ / @1$ 5+1?
• 57
Flow Control Select whether a flow control should be conducted on the cor-
responding interface.
Possible values:
• 5"1 (default value): No flow control is performed.
• "1: Flow control is performed.
• 3: Automatic flow control is performed.
6.2 ISDN Ports
In this menu, you configure the ISDN interface of your device. Here you enter data such as
the type of ISDN connection to which your device is connected.
You can use the ISDN BRI interface of your device for both dialup and leased lines over
ISDN. Proceed as follows to configure the ISDN BRI interface:
• Enter the settings for your ISDN connection: Here you set the most important parameters
of your ISDN connection.
6 Physical Interfaces bintec elmeg GmbH
114 bintec RS Series
To Next Page
Loading...
