BinTec RS353a User Manual

Property bintec RS353j , bintec RS353jw and bintec
RS353j-4G
CE symbol for all EU states
SAFERNET TM Security Technology Community passwords, PAP, CHAP, MS-CHAP, MS-
CHAP v.2, PPTP, PPPoE, PPPoA, Callback, Access Con-
trol Lists, CLID, NAT, SIF, MPPE Encryption, PPTP En-
cryption, VPN with PPTP or IPSec
Antennas and sockets
Property bintec RS353j bintec RS353jw bintec RS353j-4G
WLAN interface
(antennas)
-
802.11a/b/g/h; 802.11n
2.4 GHz and 5 GHz;
2 TX, 2 RX (2x2)
Channel level (2.4 GHz /
5GHz)
RSMA socket
-
LTE - UMTS anten-
nas
- - SMA socket
GPS antennas - - SMA socket
Available sockets:
Ethernet interface RJ45 socket (yellow) RJ45 socket (yellow) RJ45 socket (yellow)
Ethernet interface RJ45 socket (white) RJ45 socket (white) RJ45 socket (white)
VDSL/ADSL RJ45 socket (gray) RJ45 socket (gray) RJ45 socket (gray)
ISDN BRI interface RJ45 socket (black) RJ45 socket (black) RJ45 socket (black)
USB USB-Anschluss type A USB-Anschluss type A USB-Anschluss type A
USB Console USB socket type B USB socket type B USB socket type B
1.1.6 Reset
If the configuration is incorrect or if your device cannot be accessed, you can reset the
device to the ex works standard settings using the Reset button on the back of the device.
All the existing data will be deleted if you do this.
Proceed as follows:
(1) Switch off your device.
(2) Press the Reset button on your device.
(3) Keep the Reset button on your device pressed down and switch the device back on.
(4) After the  LED has flashed five times, release the Reset button.
bintec elmeg GmbH
1 Installation
bintec RS Series 9

BinTec RS353a Specifications

General

Brand	BinTec
Model	RS353a
Category	Network Router
Language	English