Field Description
send the L2TP control packet for which is received no response.
The available values are to , the default value is .
Data Packets Se-
quence Numbers
Select whether your device is to use sequence numbers for
data packets sent through a tunnel on the basis of this profile.
The function is enabled with "1.
The function is disabled by default.
14.2.2 Users
A list of all configured interface L2TP partners is displayed in the VPN->L2TP->Users
menu.
14.2.2.1 New
Choose the New button to set up new L2TP partners.
bintec elmeg GmbH
14 VPN
bintec RS Series 395
To Next Page
Loading...
