2.4 Setting up an internet connection
You can set up different types of Internet connections using your device. The most com-
mon configurations are described below. The GUI Internet wizard can be used to help con-
figure alternative configuration types.
2.4.1 Internet connection over internal xDSL modem
Apart from bintec RS123 and bintec RS123w, all devices in the RS series have an integ-
rated xDSL modem for rapid Internet access set-up. To make it easier to configure an xD-
SL internet connection, the GUI has a wizard to guide you through the connection set-up
process simply and quickly. A selection of preconfigured connections from leading pro-
viders makes configuration even easier.
(1) In GUI select the Assistants->Internet Access menu.
(2) With New make a new entry and take over the Connection Type 1 350
'.
(3) Follow the steps shown by the wizard. The wizard has its own online help, which of-
fers all of the information you may require.
(4) Once you have exited the wizard, save the configuration by clicking on the Save con-
figuration button above the menu navigation.
2.4.2 Internet connection over UMTS/LTE
Setting up an Internet connection (if your device supports UMTS/LTE connections) over
UMTS/LTE requires an activated SIM card for your UMTS/LTE provider. Insert the card as
described in Inserting the SIM card on page 23.
(1) In GUI select the Assistants->Internet Access menu.
(2) Click New to create a new entry and as Connection Type select .'*/0*.
(3) Follow the steps shown by the wizard. The wizard has its own online help, which of-
fers all of the information you may require.
(4) Once you have exited the wizard, save the configuration by clicking on the Save con-
figuration button above the menu navigation.
bintec elmeg GmbH
2 Basic configuration
bintec RS Series 31
To Next Page
Loading...
