2.4.3 Other internet connections
In addition to an ADSL connection over the internal ADSL2+ modem or a UMTS/LTE con-
nection, you can connect your device over other connection types with the internet or over
an external modem (e.g. a cable modem) or an external gateway. The corresponding wiz-
ard in GUI provides support for configurations of this type. You can find the Internet wizards
and other wizards for easy configuration of various applications at the top of the menu tree
under Assistants.
2.4.4 Testing the configuration
Once you have completed the configuration of your device, you can test the connection in
your LAN and to the Internet.
Carry out the following steps to test your device:
(1) Test the connection from any device in the local network to your device. In the Win-
dows Start menu, click Run and enter followed by a space and then the IP ad-
dress of your device (e.g. ). A window appears with the response
.
(2) Test the internet access by entering www.bintec-elmeg.com in the internet browser.
bintec elmeg GmbH's Internet site offers you the latest news, updates and document-
ation.
Note
Incorrect configuration of the devices in your LAN may result in unwanted connections
and increased charges! Monitor your device and make sure it only sets up connections
at the times you want it to. Watch the LEDs on your device (LED for ISDN, ADSL and
the Ethernet interface to which you have connected WANs).
2.5 Setting up wireless LAN
Proceed as follows to use your device (if your device supports WLAN) as an access point:
(1) In GUI select the Assistants->Wireless LAN menu.
(2) Follow the steps shown by the wizard. The wizard has its own online help, which of-
fers all of the information you may require.
(3) Store the configuration using the Save configuration button above the menu naviga-
tion.
2 Basic configuration bintec elmeg GmbH
32 bintec RS Series
To Next Page
Loading...
