Field Description
The maximum length of the entry is 45 characters.
Fields in menu Routed Protocols over ATM Settings (appears only for Type =
Routed Protocols over ATM)
Field Description
IP Address/Netmask Enter the IP addresses (IP Address) and the corresponding
netmasks (Netmask) of the ATM interface. Add new entries
with Add.
Prioritize TCP ACK
Packets
Select whether the TCP download is to be optimised in the
event of intensive TCP upload. This function can be specially
applied for asymmetrical bandwidths (ADSL).
The function is enabled with "1.
The function is disabled by default.
Field in menu PPP over ATM Settings (appears only for Type = PPP over ATM)
Field Description
Client Type Select whether the PPPoA connection is to be set up perman-
ently or on demand.
Possible values:
• - 5 (default value): The PPPoA is only set up on
demand, e.g. for Internet access.
You'll find additional information on PPP over ATM under
PPPoA on page 317.
13.2.2 Service Categories
In the WAN->ATM->Service Categories menu is displayed a list of already configured
ATM connections (PVC, Permanent Virtual Circuit) to which specific data traffic parameters
were assigned.
Your device supports QoS (Quality of Service) for ATM interfaces.
13 WAN bintec elmeg GmbH
342 bintec RS Series
To Next Page
Loading...
