BinTec RS353a - Client Management

Field Description
wireless connection.
Values:
• > 25 dB excellent
• 15 – 25 dB good
• 2 – 15 dB borderline
• 0 – 2 dB bad.
Data Rate mbps Shows the current transmission rate of data received by this cli-
ent in mbps. The following clock rates are possible: IEEE
802.11b: 11, 5.5, 2 and 1 mbps; IEEE 802.11g/a: 54, 48, 36, 24,
18, 12, 9.6 Mbps. If the 5-GHz frequency band is used, the in-
dication of 11, 5.5, 2 and 1 Mbps is suppressed for IEEE
802.11b.
Rate Displays the possible data rates on the wireless module.
Tx Packets Shows the number of sent packets for the data rate.
Rx Packets Shows the number of received packets for the data rate.
20.5.3 Client Management
The Monitoring->WLAN->Client Management menu displays an overview of the Client
Management. For each VSS you can see such information as the number of clients con-
nected, the number of clients that are affected by the 2,4/5 GHz changeover, and the
number of rejected clients.
Fig. 234: Monitoring->WLAN->Client Management
Values in the list Client Management
Field Description
VSS Description Displays the unique description of the wireless network (VSS).
Network Name (SSID) Displays the name of the wireless network (SSID).
bintec elmeg GmbH
20 Monitoring
bintec RS Series 579