Field Description
DNS Propagation
Only for IPv6 Mode = A * A 3
! and Transmit Router Advertisement
"1
Select if an in which way DNS server addresses are to be
propagated in Router Advertisements. A maximum of two DNS
server addresses is propagated.
Possible values:
• -$$: No DNS server address propagation
• 1$: The device sends its own IP adderss as DSN server
address. If the device has multiple addresses, they are used
in the following order:
• Global addresses
• ULA (Unique Local Addresses)
• Link local addresses
• -: Statically configured as well as dynamically learned
DNS server entries are propagated according to their priority.
If there are no entries, no address is propagated.
7.2 VLAN
By implementing VLAN segmentation in accordance with 802.1Q, you can configure
VLANs on your device. The wireless ports of an access point, in particular, are able to re-
move the VLAN tag of a frame sent to the clients and to tag received frames with a pre-
defined VLAN ID. This functionality makes an access point nothing less than a VLAN-
compliant switch with the enhancement of grouping clients into VLAN groups. In general,
VLAN segmenting can be configured with all interfaces.
bintec elmeg GmbH
7 LAN
bintec RS Series 147
To Next Page
Loading...
