Field Description
Note
The value for the Router Lifetime should be higher than
the shortest valid lifetime for a link prefix configured for this
interface under Basic IPv6 Parameters.
Router Preference Only for IPv6 = "1, IPv6 Mode = A *
A 3! and Transmit Router Advertise-
ment = "1
Select your router's preference for choice of default router. This
is useful for cases where a node receives advertisements from
multiple routers, or for back-up scenarios.
Possible values:
• @#
• ' (default value)
• 07
DHCP Mode Only for IPv6 = "1, IPv6 Mode = A *
A 3! and Transmit Router Advertise-
ment = "1
Select the information to be forwarded to the DHCP client.
Note
To achieve this, your router must not be set up as a DHCP
server.
By selecting - 5) F
(default value) no address- related information, such as i.e.
DNS, VoIP, etc., is passed through.
Enable this option if hosts inside of the network are to automat-
ically create their IP addresses through SLAAC. In this case, the
router sends only data via DHCP that are not address-related.
By selecting '# 3 '#
hosts receive IPv6 addresses as well as not address-related in-
formation through DHCP.
7 LAN bintec elmeg GmbH
146 bintec RS Series
To Next Page
Loading...
