Field Description
requests for your device. Some DHCP servers that assign IP
addresses by UNICAST do not respond to DHCP requests with
the set BROADCAST bit. In this case, it is necessary to send
DHCP requests in which this bit is not set. In this case, disable
this option.
The function is activated by selecting "1.
The function is enabled by default.
Proxy ARP Select whether your device is to respond to ARP requests from
its own LAN on behalf of defined remote terminals.
The function is activated by selecting "1.
The function is disabled by default.
TCP-MSS Clamping Select whether your device is to apply MSS Clamping. To pre-
vent IP packets fragmenting, the MSS (Maximum Segment
Size) is automatically decreased by the device to the value set
here.
The function is activated by selecting "1.
The function is disabled by default. Once enabled, the default
value & is entered in the input field.
Fields in the Advanced IPv6 Settings menu
Field Description
Router Lifetime Only for IPv6 = "1, IPv6 Mode = A *
A 3! and Transmit Router Advertise-
ment = "1
Enter a time period in seconds. The router remains in the de-
fault router list throughout this interval.
The default value is seconds. The maximum value is
seconds. A value of means that the router is not a
default router, and will not be entered in the default router list.
bintec elmeg GmbH
7 LAN
bintec RS Series 145
To Next Page
Loading...
