Field Description
Bridge Link Name (ID) Depending on whether you operate the radio module as Ac-
cess-Point / Bridge Link Master or as Bridge Link Client you
create bridge links in master or slave mode.
If the radio module is operated in Access-Point / Bridge Link
Master mode, you can create bridge links in master as well as
in slave mode; if it is operated in Bridge Link Client mode, only
the slave mode is available.
Enter a name for the bridge link. This name also serves as the
ID other devices use to connect to this bridge link.
In Bridge Link Client mode, the bridge link is automatically set
to slave mode. Enter the ID of the bridge link the device is to
connect to.
Preshared Key Enter a password for this bridge link. In master mode, this is the
password other devices use to connect to this bridge link. In
slave mode, it is the password of that bridge link the device is to
connect to.
Role
Here, you determine the role your device is to assume.
Possible values:
': In master mode, clients connect to your device as
slaves. In addition to the bridge link, your device can also as-
sume the role of an access point for WLAN clients.
1: In slave mode, your device connects to one of the con-
figured bridge links.
8.2 Administration
The Wireless LAN->Administration menu contains basic settings for operating your gate-
way as an access point (AP).
bintec elmeg GmbH
8 Wireless LAN
bintec RS Series 177
To Next Page
Loading...
