Field Description
The default value is .
TCP Inactivity Enter the inactivity time after which a TCP session is to be re-
garded as expired (in seconds).
Possible values are & to .
The default value is &.
PPTP Inactivity Enter the inactivity time after which a PPTP session is to be re-
garded as expired (in seconds).
Possible values are & to .
The default value is .
Other Inactivity Enter the inactivity time after which a session of another type is
to be regarded as expired (in seconds).
Possible values are & to .
The default value is &.
Fields in the Factory Reset Firewall
Field Description
Factory Reset Firewall Click Reset to reset the firewall to factory defaults.
15.2 Interfaces
15.2.1 IPv4 Groups
A list of all configured IPv4 interface routes is displayed in the Firewall->Interfaces->IPv4
Groups menu.
You can group together the interfaces of your device. This makes it easier to configure fire-
wall rules.
15.2.1.1 New
Choose the New button to set up new IPv4 interface groups.
15 Firewall bintec elmeg GmbH
424 bintec RS Series
To Next Page
Loading...
