1.3 Support information
If you have any questions about your new product, please contact a local, certified retailer
for prompt technical support. Resellers have been trained by us and receive privileged sup-
port. Further information on our support and service offers can be found on our web site at
www.bintec-elmeg.com .
1.4 Cleaning
You can clean your device easily. Use a damp cloth or antistatic cloth. Do not use solvents.
Never use a dry cloth; the electrostatic charge could cause electronic faults. Make sure that
no moisture can enter the device and cause damage.
1.5 Pin Assignments
1.5.1 USB console interface
The devices have a USB console connection for connecting to a console. This supports
Baud rates from 1200 to 115200 Bps.
The interface is executed as a standard USB Type B socket.
Fig. 11: USB Type B socket
The pin assignment is as follows:
Pin assignment in USB Type B socket
Pin Position
1 Vbus
2 D-
3 D+
4 GND
Shell Shield
1 Installation bintec elmeg GmbH
20 bintec RS Series
To Next Page
Loading...
