Field Description
• %//: Your device operates according to
802.11ac, 802.11a or 802.11n.
• %/: Your device operates according to either
802.11ac or 802.11n.
Bandwidth For Operation Mode = 3%% / :# 09
' or :# 09 61
Not for Operation Band = @H /-
Select how many channels are to be used.
Possible values:
• '@H (default value): One channel with 20 MHz bandwidth
is used.
• '@H: Two channels each with 20 MHz bandwidth are
used. In the case one channel acts as a control channels and
the other as an expansion channel.
• '@H: In 802.11 ac mode, a bandwidth of 80 MHz is ad-
ditonally available.
Number of Spatial
Streams
Not for Wireless Mode =
Select how many traffic flows are to be used in parallel.
Possible values:
• : Two traffic flows are used.
• : One traffic flow is used.
Airtime fairness This function is not available for all devices.
The Airtime fairness function ensures that the access point's
send resources are distributed intelligently to the connected cli-
ents. This means that a powerful client (e. g. a 802.11n client)
cannot achieve only a poor flow level, because a less powerful
client (e. g. a 802.11a client) is treated in the same way when
apportioning.
The function is enabled with "1.
The function is disabled by default.
This fuction is only applied to unprioritized frames of the WMM
8 Wireless LAN bintec elmeg GmbH
158 bintec RS Series
To Next Page
Loading...
