BinTec RS353a - Page 184

Field Description
WEP Key 1-4 Only for Security Mode = 2 , 2 
Enter the WEP key.
Enter a character string with the right number of characters for
the selected WEP mode. For 2  you need a character
string with 5 characters, for 2  with 13 characters, e. g.
11 for 2 , 7+ for 2 .
WPA Mode Only for Security Mode = 23 4 and 23 +
Select whether you want to use WPA (with TKIP encryption) or
WPA 2 (with AES encryption), or both.
Possible values:
• 23  23  (default value): WPA and WPA 2 can be
applied.
• 23: Only WPA is applied.
• 23 : Only WPA 2 is applied.
WPA Cipher Only for Security Mode = 23 4 and 23
+ and for WPA Mode = 23 and 23  23 
Select the type of encryption with which to apply WPA.
Possible values:
• 3 : AES is used.
• *4: TKIP is used.
• 3  *4 (default value): AES or TKIP is used.
WPA2 Cipher Only for Security Mode = 23 4 and 23
+ and for WPA Mode = 23  and 23  23

Select the type of encryption with which to apply WPA 2.
Possible values:
• 3 : AES is used.
• 3  *4 (default value): AES or TKIP is used.
Preshared Key Only for Security Mode = 23 4
8 Wireless LAN bintec elmeg GmbH
168 bintec RS Series