Field Description
Possible values:
• &: Three traffic flows are used.
• : Two traffic flows are used.
• : One traffic flow is used.
Max. Transmission
Rate
Select the transmission speed.
Possible values:
• 3 (default value): The transmission speed is determined
automatically.
• BE1C: According to setting for Operation Band, Band-
width, Number of Spatial Streams and Wireless Mode vari-
ous fixed values in mbps are available.
Airtime fairness This function is not available for all devices.
The Airtime fairness function ensures that the access point's
send resources are distributed intelligently to the connected cli-
ents. This means that a powerful client (e. g. a 802.11n client)
cannot achieve only a poor flow level, because a less powerful
client (e. g. a 802.11a client) is treated in the same way when
apportioning.
The function is enabled with "1.
The function is disabled by default.
This fuction is only applied to unprioritized frames of the WMM
Classe "Background".
Cyclic Background
Scanning
Not all devices support this function.
You can enable the Cyclic Background Scanning function so
that a search is run at regular intervals for neighbouring or
rogue access points in the network. This search is run without
negatively impacting the function as an access point.
Enable or disable the function Cyclic Background Scanning.
The function is enabled with "1.
The function is not activated by default.
9 Wireless LAN Controller bintec elmeg GmbH
200 bintec RS Series
To Next Page
Loading...
