LED Colour Status Information
off No Synchronisation.
flickering Data transfer.
WLAN (only
RS353jw)
green on WLAN connection established.
green off Radio or all assigned VSS inactive
green on (slowly
flashing)
VSS is active, no client connected
green on (fast flash-
ing)
VSS is active, at least one client connected
USB green on (flickering) VSS is active, at least one client connected,
active data traffic
green flashing Data traffic via USB send / receive.
off No USB connection.
LTE green on LTE connection established.
green flashing Data tgraffic via LTE send / receive.
off No LTE connection.
BRI green on D-channel is active.
green flashing At least one B-channel is active.
off No ISDN connection.
LAN 1 bis 4
(Link/Act)
green on Ethernet connection established.
green flashing Data traffic via Ethernet.
off No Ethernet connection.
LAN 1 bis 4
(Speed)
green on 1000 Mbits transfer rate.
orange on 100 Mbits transfer rate.
off 10 Mbits transfer rate.
LAN 5
(Link/Act)
green on WAN-Ethernet connection established.
green flashing Data via LAN 5 send / receive.
off No Ethernet connection.
LAN 5
(Speed)
green on The device is connected to the WAN at
1000 Mbits.
orange on The device is connected to the WAN at 100
1 Installation bintec elmeg GmbH
6 bintec RS Series
To Next Page
Loading...
