BinTec RS353a - Page 222

Field Description
• 23 +: 802.11x
Transmit Key
Only for Security Mode = 2  or 2 
Select one of the keys configured in WEP Key as a standard
key.
The default value is 4( .
WEP Key 1-4 Only for Security Mode = 2 , 2 
Enter the WEP key.
Enter a character string with the right number of characters for
the selected WEP mode. For 2  you need a character
string with 5 characters, for 2  with 13 characters, e. g.
11 for 2 , 7+ for 2 .
WPA Mode
Only for Security Mode = 23 4 and 23 +
Select whether you want to use WPA (with TKIP encryption) or
WPA 2 (with AES encryption), or both.
Possible values:
• 23  23  (default value): WPA and WPA 2 can be
used.
• 23: Only WPA is used.
• 23 : Only WPA2 is used.
WPA Cipher
Only for Security Mode = 23 4 and 23
+ and for WPA Mode = 23 and 23  23 
Select the type of encryption you want to apply to WPA.
Possible values:
• *4 (default value): TKIP is used.
• 3: AES is used.
• 3  *4: AES or TKIP is used.
WPA2 Cipher
Only for Security Mode = 23 4 and 23
+ and for WPA Mode = 23  and 23  23

9 Wireless LAN Controller bintec elmeg GmbH
206 bintec RS Series