Field Description
Blacklist blocktime
Enter the time for which an entry in the dynamic blacklist re-
mains valid.
Default value is seconds.
Fields in the menu VLAN
Field Description
VLAN Select whether the VLAN segmentation is to be used for this
wireless network.
The function is activated by selecting "1.
The function is disabled by default.
VLAN ID Enter the number that identifies the VLAN.
Possible values are to .
VLAN ID 1 is not possible as it is already in use.
Fields in the menu Bandwidth limitation for each WLAN client
Field Description
Rx Shaping Select a bandwidth limitation in the receive direction.
Possible values are
• ) 1 (default value)
• F '"/, F '"/, '"/ up to '"/
in single Mbit/s steps, '"/, '"/, & '"/,
'"/ and '"/.
Tx Shaping Select a bandwidth limitation in the transmit direction.
Possible values are
• ) 1 (default value)
• F '"/, F '"/, '"/ up to '"/
in single Mbit/s steps, '"/, '"/, & '"/,
'"/ and '"/.
9 Wireless LAN Controller bintec elmeg GmbH
210 bintec RS Series
To Next Page
Loading...
